Description

Product Features & Specifications

Specific Compatibility: This kickstand is engineered for the AOSTIRMOTOT S07-B model. It matches the factory mounting points and geometry.
Robust Construction: Features a heavy-duty aluminum alloy body with a reinforced bracket. The design offers high stability for the 73lb weight of the fat tire e-bike.
Adjustable Length: Includes a spring-loaded adjustment mechanism to vary the leg length (typically 11-13 inches). This lets you compensate for tire wear or level the bike on slight gradients.
Corrosion Resistant: Features an electrophoretic black coating (E-coat) process, providing excellent resistance to rust and harsh weather conditions.

Installation Notes

Frame Bridge Mount: The S07-B uses a center-mount bracket located between the crank and the rear wheel on the chainstays.
Hardware Requirement: Installation requires a 22mm mounting bracket clamp diameter. You will need a 4mm or 5mm Allen key (Hex wrench) to secure the plate bolts.
Avoid Frame Damage: It is recommended to apply a small amount of grease to the mounting plate before attaching it to prevent future seizing and protect the paint on the aluminum frame.

Troubleshooting Adjustment

Bike Too Upright: Unlock the cam lever, screw the leg outward (to lengthen), and retighten.
Bike Leaning Too Far: Unlock the cam lever, screw the leg inward (to shorten), and retighten.
Contact with Pedals: If the pedal hits the stand when folded back, adjust the leg shorter so the bike leans further away from the drive side.